Elektronski fakultet u Nišu, Univerzitet u Nišu
Katedra za Energetiku

Prof. dr Nebojsa Mitrović

Details

Written by Nebojsa Mitrovic

Angažovanje na predmetima

Elektromotorni pogoni, Odabrana poglavlja iz elektromotornih pogona, Električne mašine, Elektromehničko pretvaanje energije, Modelovanje električnih mašina i pogona

Lista publikacija

a) Izdavačka delatnost /Monografia/Knjge/Poglavlja u knjizi

1. Nebojša N. Mitrović, Vojkan Z. Kostić, Milutin P. Petronijević, Borislav I. Jeftenić, “Implementacija algoritama za upravljanje momentom i fluksom asinhronih motora”, Univerzitet u Nišu, Elektronski fakultet, edicija: Monografije, ISBN 978-86-85195-74-7, 2009, Niš

2. Nebojsa Mitrovic, Milutin Petronijevic, Vojkan Kostic and Borislav Jeftenic (2012). “Electrical Drives for Crane Application”, Mechanical Engineering, Murat Gokcek (Ed.), ISBN: 978-953-51-0505-3, DOI: 10.5772/35560, InTech, Available from: http://www.intechopen.com/books/mechanical-engineering/electrical-drives-for-crane-application

3. B. I. Jeftenić, V. Vasić, Đ. Oros, N. Mitrović, Milutin Petronijević, Saša Štatkić, M. Bebić, “Elektromotorni pogoni – zbirka rešenih zadataka“, Akademska misao, 2003, Beograd.

4. N. Mitrović, B. Jeftenić, M. Petronijević, V. Kostić, “Elektromotorni pogoni –Laboratorijske vežbe”, Elektronski fakultet u Nišu, edicija: Pomoćni udžbenici, 2004, Niš

b) Radovi objavljeni u časopisima međunarodnog značaja / List of publication in international journals:

1. Vojkan Kostić, Nebojša Mitrović, Bojan Banković, Filip Filipović, Milutin Petronijević, “Optimal Design and Control of Multi-Motor Drive System for Industrial Application“, The Journal Tehnički vjesnik – Technical Gazette (TV-TG), Vol. 27, No. 6, December 2020, ISSN 1330-3651 (Print), ISSN 1848-6339 (Online), doi: https://doi.org/10.17559/TV-20180509152814, pp. 1815-1824.

URL: https://hrcak.srce.hr/248215 (M23=3)

2. Bojan Banković, Filip Filipović, Nebojša Mitrović, Milutin Petronijević, Vojkan Kostić, “A Building Block Method for Modeling and Small-Signal Stability Analysis of the Autonomous Microgrid Operation“, Energies, Volume 13, Issue 6, 1492, March 2020, https://doi.org/10.3390/en13061492.

URL: https://www.mdpi.com/1996-1073/13/6/1492/htm (M23=3)

3. Filip Filipović, Milutin Petronijević, Nebojša Mitrović, Bojan Banković, Vojkan Kostić, “A Novel Repetitive Control Enhanced Phase-Locked Loop for Synchronization of Three-Phase Grid-Connected Converters“, Energies, Volume 13, Issue 1, 135, January 2020, doi: https://doi.org/10.3390/en13010135. URL: https://www.mdpi.com/1996-1073/13/1/135 (M23=3)

4. Milutin Petronijević, Boban Veselić, Nebojša Mitrović, Vojkan Kostić, “Voltage Sag Sensitivity of Industrial Vector Controlled Induction Motor Drives – A Comparative Study“, FACTA UNIVERSITATIS, Series: Automatic Control and Robotics, Vol. 16, No. 2, 2017, ISSN: 1820-6417 (Print), ISSN: 1820-6425, DOI: 10.22190/FUACR1702167P, UDC (629.35.12.1:534.83):679.013, pp. 167-183.

URL: http://casopisi.junis.ni.ac.rs/index.php/FUAutContRob/article/view/3021/1855

5. Vojkan Kostić, Nebojša Mitrović, Bojan Banković, Milutin Petronijević, “The Monospiral Motorised Cable Reel in Crane Applications“, FACTA UNIVERSITATIS, Series: Mechanical Engineering, Vol. 15, No. 2, June 2017, ISSN: 0354-2025 (Print), ISSN: 2335-0164 (Online), COBISS.SR-ID 98732551, ZDB-ID: 2766459-4, DOI: 10.22190/FUME170508015K, UDC 621.3/.8, pp. 315-330.

URL: http://casopisi.junis.ni.ac.rs/index.php/FUMechEng/article/view/2880/1759

6. Milutin Petronijević, Nebojša Mitrović, Vojkan Kostić and Bojan Banković, “An Improved Scheme for Voltage Sag Override in Direct Torque Controlled Induction Motor Drives“, Energies, Volume 10, Issue 5, 663, May 2017 [Online], doi: 10.3390/en10050663.

URL: http://www.mdpi.com/1996-1073/10/5/663/htm

7. Petronijević M., Veselić B., Mitrović N., Kostić V., Jeftenić B., “Comparative study of unsymmetrical voltage sag effects on adjustable speed induction motor drives“, Electric Power Applications, IET, ISSN: 1751-8660, INSPEC Accession Number: 12032715, Digital Object Identifier: 10.1049/iet-epa.2010.0144, Vol. 5, No. 5, May 2011, pp. 432-442. URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=5783644&isnumber=5783640

8. Nebojša Mitrović, Vojkan Kostić, Milutin Petronijević, Borislav Jeftenić, “Practical Implementation of Load Sharing and Anti Skew Controllers for Wide Span Gantry Crane Drives“, Strojniški vestnik – Journal of Mechanical Engineering, ISSN 0039-2480, Volume 56, Number 3, 2010, pp. 207-216, UDC 621.875.5

9. N. Mitrovic, V. Kostic, M. Petronijevic and B. Jeftenic, “Practical Implementation of Multi-Motor Drives for Wide Span Gantry Cranes“, Iranian Journal of Science & Technology, Transaction B: Engineering, ISSN 1028-6284, Volume 34, Number B6, 2010, pp. 649-654.

URL: http://www.shirazu.ac.ir/en/index.php?page_id=2463 (M23=3)

10. Nebojsa Mitrovic, Vojkan Kostic, Milutin Petronijevic, Borislav Jeftenic, “Multi-Motor Drives for Crane Application“, Advances in Electrical and Computer Engineering, ISSN 1582-7445, e-ISSN 1844-7600, Volume 9, Number 3, 2009, pp. 57-62, doi: 10.4316/AECE.2009.03011.

11. Milutin Petronijević, Nebojša Mitrović, Vojkan Kostić, and Borislav Jeftenić, “Assessment of Unsymmetrical Voltage Sag Effects on AC Adjustable Speed Drives”, Facta Universitatis, Series: Electronics and Energetics, Vol. 22, No. 3, December 2009, YU ISSN 0353-3670, COBISS.SR-ID 12826626, pp. 341-360.

12. M. Petronijević, N. Mitrović, and V. Kostić, “Voltage Sag Effects on High Performance Electric Drives”, Electronics, Vol. 13, No. 2, December 2009, ISSN 1450-5843, pp. 20-24.

13. Vojkan Kostic, Nebojsa Mitrovic, Milutin Petronijevic and Milan Bebic, “Start up Current in Direct Torque Controlled Induction Motor Drives”, Scientific Bulletin of ''Politehnica'' University of Timisoara, Romania, Transactions on Automatic Control and Computer Science, Vol. 51(65), No. 4, 2006, ISSN 1224-600X, pp. 5-10.

14. Milutin Petronijević, Borislav Jeftenić, Nebojša Mitrović, and Vojkan Kostić, “Voltage Sag Drop in Speed Minimization in Modern Adjustable Speed Drives”, Facta Universitatis, Series: Electronics and Energetics, Vol. 19, No. 2, August 2006, YU ISSN 0353-3670, COBISS.SR-ID 12826626, pp. 231-245.

15. Milutin Petronijevic, Borislav Jeftenic, Nebojsa Mitrovic and Vojkan Kostic, “Matlab/Simulink Simulation of Voltage Sags Effects on Adjustable Speed Drives”, Scientific Bulletin of ''Politehnica'' University of Timisoara, Transactions on Automatic Control and Computer Science, Vol. 49(63), No. 1, 2004, ISSN 1224-600X, Timisoara, pp. 155-158.

16. Vojkan Kostic, Nebojsa Mitrovic, Milutin Petronijevic and Borislav Jeftenic, “Torque Ripple Minimization in Direct Torque Controlled Induction Motor Drive Based on Duty Ratio Modulation Method, Part II”, Scientific Bulletin of ''Politehnica'' University of Timisoara, Romania, Transactions on Automatic Control and Computer Science, Vol. 49(63), No. 1, 2004, ISSN 1224-600X, pp. 87-92.

17. Nebojsa Mitrovic, Vojkan Kostic, Milutin Petronijevic and Borislav Jeftenic, “Simulation of Direct Torque Control Schemes for Electric Drive Application, Part I”, Scientific Bulletin of ''Politehnica'' University of Timisoara, Transactions on Automatic Control and Computer Science, Vol. 49(63), No. 1, 2004, ISSN 1224-600X, Timisoara, pp. 83-86.

18. Nebojsa Mitrovic, Milutin Petronijevic and Vojkan Kostic, “Slip Frequency and Voltage Drop Compensation in Speed Sensorless PWM Induction Motor Drives”, Periodica Politechnica, Transactions on Automatic Control and Computer Science, Tom 47(61), No. 1, 2002, ISSN 1224-600X, Timisoara, Romania, pp. 24-27.

19. B. Jeftenić, M. Petronijević and N. Mitrović, "Single Phase reversible rectifier with unity power factor", Facta Universitatis, series Electronics and Energetics, YU ISSN 0353-3670, vol. 10, No. 2, 1997, pp. 295-310.

20. N. Mitrović, B. Jeftenić, M. Petronijević, “Double Fed Induction Motor Speed Control with Standard PWM Inverter in Stator”, Facta Universitatis, series Electronics and Energetics, vol. 10, No. 1, 1997, pp. 125-138.

21. B.I. Jeftenić, M.Z. Bebić, N.N. Mitrović, , "A Simple Speed Sensorless Control For Variable Frequency Induction Motor Drives", IEEE Transactions on Energy Conversion, Vol. 14, No. 3, Sept. 1999, pp.500-505.

22. Stojanović D., Vukić Đ, Mitrović N., Stanisavljević Z., "Influence of Input Data Accuercy on Calculation Results of Electromechanical Transients in Power System", Modelling, Measurement & Control, A, AMSE Press, Vol. 57, N0 3, 1994, pp. 55-64.

c) Radovi objavljeni u nacionalnim časopisima

1. Vojkan Kostić, Milutin Petronijević, Nebojša Mitrović, Bojan Banković, “Experimental Verification of Direct Torque Control Methods for Electric Drive Application”, Facta Universitatis, Series: Automatic Control and Robotics, Vol. 8, No. 1, 2009, ISSN 1820-6417, UDC 621.313.33 004.424.451.2, pp. 111-126.
2. Milutin P. Petronijević, Nebojša N. Mitrović, Vojkan Z. Kostić, Bojan G. Banković, “Effects of Unsymmetrical Voltage Sags on Industrial Adjustable Speed Drives”, Serbian Journal of Electrical Engineering, Vol. 6, No. 3, December 2009, ISSN 1451-4869, UDK: 621.313.3.027:681.51, pp. 495-505.
3. N.N. Mitrović, B. I. Jeftenić, M.Z. Bebić, M. P. Petronijević, D. Jevtić "Control of AC Drives Without Speed Sensors by Frequency Compensation", Electronics, Faculty of El. Eng. Univ. of Banjaluka, Vol.4, No.1, November 2000, pp.26-51.
4. Dobrivoje Stojanović, Nebojša Mitrović, Dragan Petrović, "Torzione oscilacije vratila velikih turbogeneratora" Elektroprivreda br. 3, 1996., str. 20-27.
5. Stojanović D., Mitrović N., "Analiza tačnosti modelovanja sinhronog generatora kod proračuna elektromehaničkih prelaznih procesa u EES", Elektroprivreda br. 11-12, 1991., str. 420-424.

d) Radovi saopšteni na skupovima međunarodnog značaja, štampani u celini

1.            N. N. Mitrovic, V. Z. Kostic, F. R. Filipović, B. G. Banković and M. P. Petronijevic, "Laboratory Set-up for Testing of Vector Controlled Induction Motor Drives," 2023 58th International Scientific Conference on Information, Communication and Energy Systems and Technologies (ICEST), Nis, Serbia, 2023, pp. 325-328, doi: 10.1109/ICEST58410.2023.10187317.

2.            F. R. Filipović, M. P. Petronijević, N. N. Mitrović, B. G. Banković and V. Z. Kostic, "Utilization of Affordable Modern Technologies in Examination of DC/AC Machines and Drives," 2023 58th International Scientific Conference on Information, Communication and Energy Systems and Technologies (ICEST), Nis, Serbia, 2023, pp. 313-316, doi: 10.1109/ICEST58410.2023.10187289.

3.            Filip Filipović, Milutin Petronijević, Nebojša Mitrović, Bojan Banković, Vojkan Kostić, “Application of Repetitive Ripple Estimator in Synchronization of Three Phase Grid Tie Inverters”, 20th INTERNATIONAL SYMPOSIUM on POWER ELECTRONICS - Ee 2019, NOVI SAD, REPUBLIC OF SERBIA, October 23th - 26th, 2019, Proceedings of Full Papers, ISBN 978-86-6022-219-2, Paper No. T7.1-2, pp. 1-6.

4.            Bojan Banković, Nebojša Mitrović, Milutin Petronijević, Filip Filipović, Vojkan Kostić, “Design and Analysis of the Droop Control Method for Parallel Inverters Operation in the Autonomous Microgrid”, 6th International Conference on Electrical, Electronic and Computing Engineering, IcETRAN 2019, June 03–06, 2019, Silver Lake, Serbia, Proceedings of Full Papers, ISBN 978-86-7466-785-9, pp. 315-321.

5.            Filip Filipović, Milutin Petronijević, Nebojša Mitrović, Bojan Banković, Vojkan Kostić, “Current Sampling Techniques for Digitally Controlled Inverters”, 6th International Conference on Electrical, Electronic and Computing Engineering, IcETRAN 2019, June 03–06, 2019, Silver Lake, Serbia, Proceedings of Full Papers, ISBN 978-86-7466-785-9, pp. 281-286.

6.            Filip Filipović, Milutin Petronijević, Nebojša Mitrović, Boban Veselić, Bojan Banković, Vojkan Kostić, “A Comparative Study of Current PI Controller Tuning Methods for Grid-Tie Inverters”, XIV International SAUM Conference on Systems, Automatic Control and Measurements, SAUM 2018, 14-16 November, 2018, Niš, Serbia, Proceedings of Papers, ISBN 978-86-6125-205-1, pp. 175-178.

7.            Filip Filipović, Milutin Petronijević, Nebojša Mitrović, Bojan Banković, Vojkan Kostić, “An Application of a Finite State Machine for a Safe Grid-Tie Inverter Operation”, XIV International SAUM Conference on Systems, Automatic Control and Measurements, SAUM 2018, 14-16 November, 2018, Niš, Serbia, Proceedings of Papers, ISBN 978-86-6125-205-1, pp. 171-174.

8.            Milutin Petronijević, Nebojša Mitrović, Filip Filipović, Bojan Banković, Vojkan Kostić, “Performance Improvement of AC Adjustable Speed Drives During Voltage Sag Events”, 4th Virtual International Conference on Science, Technology and Management in Energy, eNergetics 2018, 25-26 October, 2018, Niš, Serbia, Proceedings of Papers, ISBN 978-86-80616-03-2, pp. 161-169.

9.            Bojan Banković, Filip Filipović, Milutin Petronijević, Nebojša Mitrović, Vojkan Kostić, “Verification of Active Front End Converter Using Co-Simulation Technique in the LabVIEW”, Small Systems Simulation Symposium 2018, SSSS 2018, February 12-14, Niš, Serbia, Proceedings of Papers, ISBN 978-86-6125-199-3, pp. 71-76, http://ssss.elfak.ni.ac.rs/2018/proceedings/.

10.         Bojan Banković, Nebojša Mitrović, Vojkan Kostić, Milutin Petronijević, Filip Filipović, “Harmonic impact on power grid of multi drive system with active front end technology”, 13th International Conference on Applied Electromagnetics - ПЕС 2017, August 30 – September 01, 2017, Niš, Serbia, Proceedings of Full Papers, ISBN 978-86-6125-185-6, COBISS.SR-ID 242728460, paper O3-3.

11.         Bojan Banković, Nebojša Mitrović, Vojkan Kostić, Milutin Petronijević, “LCL filter design for three phase grid-connected power converters”, 13th International Conference on Applied Electromagnetics - ПЕС 2017, August 30 – September 01, 2017, Niš, Serbia, Proceedings of Full Papers, ISBN 978-86-6125-185-6, COBISS.SR-ID 242728460, paper O2-2. (M33=1)

12.         Bojan Banković, Milutin Petronijević, Nebojša Mitrović, Vojkan Kostić and Filip Filipović, “Integrated Education Platform for PI Controllers Tuning of the Electrical Drives”, ICEST 2017, June 28-30, 2017, Niš, Serbia, Proceedings of Papers, ISSN: 2603-3259 (Print), ISSN: 2603-3267 (Online), pp. 350-353.

13.         B. G. Banković, N. N. Mitrović, V. Z. Kostić, M. P. Petronijević, and M. Milovanovic, “Multi Drive System for Industrial Application”, XIII International SAUM Conference on Systems, Automatic Control and Measurements, SAUM 2016, 09-11 November, 2016, Niš, Serbia, Proceedings of Papers, ISBN 978-86-6125-170-2, pp. 116-119.

14.         V. Z. Kostić, N. N Mitrović, B. G. Banković, “The Monospiral Motorised Cable Reel in Crane Applications”, XIII International SAUM Conference on Systems, Automatic Control and Measurements, SAUM 2016, 09-11 November, 2016, Niš, Serbia, Proceedings of Papers, ISBN 978-86-6125-170-2, pp. 112-115.

15.         Nebojša Mitrović, Vojkan Kostić, Milutin Petronijević, Bojan Banković, “Pspice Model for Three Phase Induction motor”, Small System Simulation Symposium 2016, Feb. 12-14, Faculty of Eelctronic Engineering Niš, Serbia, pp.32-35.

16.         Bojan Banković, Nebojša Mitrović, Vojkan Kostić, Milutin Petronijević, “Pspice Simulation of Power Eelctronics and Induction Motor Drives”, Small System Simulation Symposium 2016, Feb. 12-14, Faculty of Eelctronic Engineering Niš, Serbia, pp.36-39.

17.         Sucurovic, M., Mitrovic, N., Bjekic, M., Bozic, M., Rosic, M., “Calibration of the electromagnetic brake”, International scientific conference UNITECH ’15, Gabrovo, Bulgaria, 20-21 Nov. 2015, ISSN 1313-230X, pp. I-159-I-162.

18.         Božić Miloš, Nebojša Mitrović, Marko Rosić, “Realization of Flying Shear for Labotratory Experiments”, ICEST 2013, 26-29 June, Bitola, Macedonia, Proceedings of Papers, Volume 2, pp. 847-850.

19.         Nebojsa Mitrovic, Milutin Petronijevic, Vojkan Kostic and Bojan Bankovic, “Dynamic Braking in Induction Motor Adjustable Speed Drives”, ICEST 2012, 28-30 June, 2012, Veliko Tarnovo, Bulgaria, Proceedings of Papers, ISBN 978-619-167-003-1, Volume 2, pp. 552-555.

20.         Bojan Banković, Nebojša Mitrović, Vojkan Kostić and Milutin Petronijević, “Application of Active Front End Rectifier in Electrical Drives”, ICEST 2012, 28-30 June, 2012, Veliko Tarnovo, Bulgaria, Proceedings of Papers, ISBN 978-619-167-003-1, Volume 2, pp. 556-559.

21.         B. Banković, N. Mitrović, M. Petronijević, and V. Kostić “Practical Implementation of Field Oriented and Direct Torque Control Schemes for Teaching Induction Motor Drive”, XI International SAUM Conference on Systems, Automatic Control and Measurements, SAUM 2012, 14-16 November, 2012, Niš, Serbia, Proceedings of Papers, ISBN 978-86-6125-072-9, pp. 414-417.

22.         Nebojsa Mitrovic, Milutin Petronijevic, Vojkan Kostic, Borislav Jeftenic, Bojan Bankovic, “Analysis of Active Front End Based Multidrive System in Crane Application”, 16th International Symposium on Power Electronics - Ee 2011, Novi Sad, Republic of Serbia, October 26th - 28th, 2011, Proceedings of Papers on CD, ISBN 978-86-7892-356-2, Paper No. T2-1.5, pp. 1-5.

23.         Vojkan Kostić, Nebojša Mitrović, Milutin Petronijević and Bojan Banković, “Experimental Analysis of Direct Torque Control Methods for Electric Drive Application”, ICEST 2011, June 29 – July 1, 2011, Niš, Serbia, Proceedings of Papers, Volume 3, pp. 997-1000.

24.         Nebojsa Mitrovic, Vojkan Kostic, Milutin Petronijevic and Bojan Bankovic, “Active Front End Converter in Common DC Bus Multidrive Application”, ICEST 2011, June 29 – July 1, 2011, Niš, Serbia, Proceedings of Papers, Volume 3, pp. 989-992.

25.         Milutin P. Petronijević, Nebojša Mitrović, Borislav Jeftenić, Vojkan Kostić, “Effects of Unsymmetrical Voltage Sags on Adjustable Speed Drives Torque Ripple”, 35th Annual Conference of the IEEE Industrial Electronics Society, IECON 2009, 03-05 November, 2009, Porto, Portugal, Preprint Proceedings, pp. 1124-1129.

26.         Milutin Petronijević, Nebojša Mitrović, Vojkan Kostić, Bojan Banković, “Behavior of Induction Motor Drives Due to Unsymmetrical Voltage Sags”, 15th International Symposium of Power Electronics - Ee 2009 (XV Međunarodni simpozijum Energetska elektronika – Ee 2009), Novi Sad, Republic of Serbia, October 28th - 30th, 2009, Proceedings of Papers on CD, ISBN 978-86-7892-208-4, Paper No. T6-2.9, pp. 1-5.

27.         Vojkan Kostić, Nebojša Mitrović, Milutin Petronijević, Bojan Banković, “Implementation of SVPWM Based on dSPACE System”, 15th International Symposium of Power Electronics - Ee 2009 (XV Međunarodni simpozijum Energetska elektronika – Ee 2009), Novi Sad, Republic of Serbia, October 28th - 30th, 2009, Proceedings of Papers on CD, ISBN 978-86-7892-208-4, Paper No. T4-1.10, pp. 1-5.

28.         Nebojša Mitrović, Vojkan Kostić, Milutin Petronijević, Borislav Jeftenić, Bojan Banković, “Skew Controller for Rail Mounted Wide Span Gantry Cranes”, 15th International Symposium of Power Electronics - Ee 2009 (XV Međunarodni simpozijum Energetska elektronika – Ee 2009), Novi Sad, Republic of Serbia, October 28th - 30th, 2009, Proceedings of Papers on CD, ISBN 978-86-7892-208-4, Paper No. T2-1.3, pp. 1-4.

29.         Borislav Jeftenić, Leposava Ristić, Milan Bebić, Vojkan Kostić, Nebojša Mitrović, Milutin Petronijević, “Savremene Metode Upravljanja Pumpama za Odvodnjavanje Tla na Površinskim Kopovima”, 14th International Symposium of Power Electronics - Ee 2007 (XIV Međunarodni simpozijum Energetska elektronika – Ee 2007), Novi Sad, Republic of Serbia, November 7th - 9th, 2007, Paper No. T4-3.1, pp. 1-4.

30.         Nebojsa Mitrovic, Vojkan Kostic, Milutin Petronijevic, “Slip Frequency Calculation Method in Speed Sensorless Induction Motor Drives”, ICEST 2006, June 29 – July 1, 2006, Sofia, Bulgaria, Proceedings of Papers, pp. 324-327.

31.         Vojkan Kostic, Nebojsa Mitrovic, Milutin Petronijevic, Milan Bebic, “Start up Current Limitation Method in Direct Torque Controlled Induction Motor Drives”, The 7th International Conference on Technical Informatics, CONTI 2006, 8-9 June, 2006, Timisoara, Romania, Proceedings of Papers, Vol. 1, ISBN 973-625-320-1, pp. 35-38.

32.         Vojkan Kostić, Nebojša Mitrović, Milutin Petronijević, Milan Bebić, “Polazna Struja Asinhronog Motora sa DTC Upravljanjem”, 13th International Symposium of Power Electronics - Ee 2005 (XIII Međunarodni simpozijum Energetska elektronika – Ee 2005), Novi Sad, Serbia & Montenegro, November 2th - 4th, 2005, Paper No. T4-4.2, pp. 1-4.

33.         Milutin P. Petronijević, Borislav I. Jeftenić, Nebojša N. Mitrović, Vojkan Z. Kostić, “Computer Simulation of Voltage Sag Effects on Adjustable Speed Drives”, ICEST 2005, June 29 – July 1, 2005, Nis, Serbia and Montenegro, Proceedings of Papers, Volume 1, pp. 147-150.

34.         Vojkan Kostic, Nebojsa Mitrovic, Milutin Petronijevic, Milan Bebic, “Start up Current in Direct Torque Controlled Induction Motor Drives”, ICEST 2005, June 29 – July 1, 2005, Nis, Serbia and Montenegro, Proceedings of Papers, Volume 1, pp. 143-146.

35.         Petronijevic M.P., Jeftenic B.I., Mitrovic N.M., Kostic V.Z., “Voltage Sag Drop in Speed Minimization in Modern Adjustable Speed Drives”, IEEE International Symposium on Industrial Electronics, ISIE 2005, June 20-23, 2005, Dubrovnik, Croatia, Proceedings of the IEEE International Symposium on Industrial Electronics, Volume 3, pp. 929- 934.

36.         Milutin Petronijevic, Vojkan Kostic, Nebojsa Mitrovic and Borislav Jeftenic, “Modern PWM drives voltage sags sensitivity”, ICEST 2004, June 16-19, 2004, Bitola, Macedonia, Proceedings of Papers, pp. 663-666.

37.         Nebojsa Mitrovic, Vojkan Kostic, Milutin Petronijevic and Borislav Jeftenic, “Flux and Torque Ripple Minimization in DTC of Induction Motor”, ICEST 2004, June 16-19, 2004, Bitola, Macedonia, Proceedings of Papers, pp. 805-808. (M33=1)

38.         Vojkan Kostić, Nebojša Mitrović, Milutin Petronijević, Borislav Jeftenić, “Direktno Upravljanje Momentom Asinhrone Mašine”, 12th International Symposium of Power Electronics - Ee 2003 (XII Međunarodni simpozijum Energetska elektronika – Ee 2003), Novi Sad, Serbia & Montenegro, November 5th - 7th, 2003, Paper No. T2-1.5, pp. 1-4.

39.         Nebojsa Mitrovic, Vojkan Kostic, Milutin Petronijevic and Borislav Jeftenic, “Comparison by Simulation of Torque Control Schemes for Electric Drive Application”, ICEST 2003, 16-18 October 2003, Sofia, Bulgaria, Proceedings of Papers, pp. 417-420.

40.         Nebojsa Mitrovic, Milutin Petronijevic, Borislav Jeftenic and Vojkan Kostic, “Steady State Speed Error Reduction in Sensorless PWM Induction Motor Drives”, ICEST 2002, 1-4 October 2002, Nis, Yugoslavia, Proceedings of Papers, pp. 692-695.

41.         Milutin Petronijević, Borislav Jeftenić, and Nebojša Mitrović,, "Application of the 3-Phase Power Factor Correction Rectifier in DC Drive ", Proc. of XXXVII Int. Science Conf. - ICEST, Nis, 2002, pp.385-388.

42.         D. Stojanović, D. Petrović, N. Mitrović, "Torsional Torques of Big Turbine-Generator Shafts Due To Malsznchronization", Proc. of 10th Mediterranean Electrotechnical Conference, MEleCon 2000, Vol.III, pp.1051-1054.

43.         D. Stojanović, M. Veselinović, N. Mitrović, L. Korunović "Calculations and Analysis of Induction Motors Impact on Short-Circuit Current", Proc. of 10th Mediterranean Electrotechnical Conference, MEleCon 2000, Vol.III, pp1076-1079.

44.         D. Stojanović, D. Petrović, N. Mitrović, "Analysis of Torsional Torques of Big Turbine-Generator Shafts", Proc. of IPST'99- International Conference on Power System Transients, June 20-24, Budapest - Hungary

45.         Nebojša Mitrović, Borislav Jeftenić, Milutin Petronijević, "Modelling a Variable Frequency Induction Motor Drive", Proc. of III Intern. Conf. on Risk in Technological Systems and Environment, Nis, 1997, pp.81-84.

46.         Nebojša Mitrović, Borislav Jeftenić, Milutin Petronijević, "PSPICE Model For Three Phase Induction Motor ", Proc. of III Intern. Conf. on Risk in Technological Systems and Environment, Nis, 1997, pp.77-80.

47.         B. Jeftenić, N. Mitrović, S. Milosavljević, M. Rodić, "Low Cost Speed Sensorless Control in PWM Inverter Induction Motor Drives", Power Electronic and Motion Control Conference, PEMC'96, Budapest, Hungary, September 2-4, 1996, Proc. Vol. II, pp.489-493.

48.         B. Jeftenić, N. Mitrović, S. Milosavljević, M. Rodić, "Speed Control in Inverter Induction Motor Drives Based on Only One Current Sensor", 27th Annual IEEE Power Electronics Specialist Conference, PESC'96, Milano, Italy, Vol. I, pp. 364-369.

49.         D. Stojanović, M. Veselinović, N. Mitrović, "Induction Motors Influence to Short-Circuit Current", 31st Universities Power Engineering Conference, UPEC'96, Iraklio, Greec, September 1996, Proc. Vol.3, pp. 877-879.

50.         N. Mitrović, B. Jeftenić, Đ. Vukić, M Petronijević, "Voltage PWM Inverter Application for Double Fed Induction Motor Control", 5th International Conference, Tesla III Millennium, Beograd, Yugoslavia, October 15-18, 1996, Proc. Vol.1, pp. II-97-104.

51.         Đ. Vukić, Ž. Milkić, D. Stojanović, N. Mitrović, "The Characteristics and Development Trends for Double Fed Induction Motor", 5th International Conference, Tesla III Millennium, Beograd, Yugoslavia, October 15-18, 1996, Proc. Vol.1, pp. I-140-147.

52.         Nebojša Mitrović, Borislav Jeftenić, Dobrivoje Stojanović, Milutin Petronijević, "Parameter Identification Technique for Inverter Fed Induction Motor", International Conference on Technical Informatics, ConTI 96, Timisoara, Romania, November 14-16, 1996, Vol. 2, pp. 145-152.

53.         Mitrović N., Stojanović D., Jeftenić B., Petronijević M., "Induction Motor Parameteter Identification By Using Theory of Sensitivity", International Conference on Technical Informatics, ConTI 94, Timisoara, Romania, November 16-19, 1994, Vol. 1, pp. 6-14.

54.         B. Jeftenić, N. Mitrović, "A Linearized Model of Current Source Saturated Induction Motor", 4th Int. Conf. IMACS-TC1'93, Montreal, Canada, July 7-9, 1993, pp.339-344.

55.         B. Jeftenić, N. Mitrović, "Motor Parameters Identification in Power Converter Driven Induction Machines", SPEEDAM'92, Positano, Italy, May 19-21, 1992, pp.261-266.

 e) Tehnička rešenja

1.            Nebojša Mitrović, Vojkan Kostić, Milutin Petronijević, Bojan Banković, “Laboratorijski prototip pretvarača za četvorokvadrantni rad sa rekuperacijom energije”. Kategorija tehničkog rešenja: (M83) “Novo laboratorijsko postrojenje, novo eksperimentalno postrojenje, novi tehnološki postupak”. Rezultat projekta III44004: “Razvoj i integracija tehnologija projektovanja inteligentnog mehatroničkog interfejsa za primenu u medicini”. Primena od 2015. Korisnik: Elektronski fakultet u Nišu.

2.            Vojkan Kostić, Nebojša Mitrović, Milutin Petronijević, Bojan Banković, “Algoritam za direktno upravljenje momentom asinhronog motora primenom modulacije prostornog vektora”: M83 “Novo laboratorijsko postrojenje, novo eksperimentalno postrojenje, novi tehnološki postupak”. Rezultat projekta III44004: “Razvoj i integracija tehnologija projektovanja inteligentnog mehatroničkog interfejsa za primenu u medicini”. Primena od 2014. Korisnik: Elektronski fakultet u Nišu.

3.            Milutin Petronijević, Vojkan Kostić, Nebojša Mitrović, Bojan Banković, Milan Radić, “Smanjenje osetljivosti regulisanih pogona naizmenične struje na uticaj propada napona primenom metode podešavanja fluksa”: M85 “Prototip, nova metoda, softver, standardizovan ili atestiran instrument, nova genska proba, mikroorganizmi”. Rezultat projekta III44006: “Razvoj novih informaciono-komunikacionih tehnologija, korišćenjem naprednih matematičkih metoda, sa primenama u medicini, telekomunikacijama, energetici, zaštiti nacionalne baštine i obrazovanju”. Primena od 2014. Korisnik: Istraživačko-razvojni centar „Alfatec“ Niš.

4.            M. Petronijević, V. Kostić, N. Mitrović, B. Banković, M. Kocić, S. Stankov, “Industrijsko postrojenje za interoperabilno upravljanje elektromotornim pogonima pumpnih stanica povećane pouzdanosti”. Kategorija tehničkog rešenja: (M83) “Novo laboratorijsko postrojenje, novo eksperimentalno postrojenje, novi tehnološki postupak”. Rezultat projekta III44006: “Razvoj novih informaciono-komunikacionih tehnologija, korišćenjem naprednih matematičkih metoda, sa primenama u medicini, telekomunikacijama, energetici, zaštiti nacionalne baštine i obrazovanju”. Primena od 2012. Korisnik: JKP Naissus Niš.

5.            Goran Đorđević, Milutin Petronijević, Nebojša Mitrović, Svemir Popić, Darko Todorović, Miroslav Božić, Miloš Milošević, “Aktivni sistem pozicioniranja visoke precinosti primenom sinhronih motora u sprezi master-slave": M85 “Prototip, nova metoda, softver, standardizovan ili atestiran instrument, nova genska proba, mikroorganizmi” Rezultat projekta III44004: “Razvoj i integracija tehnologija projektovanja inteligentnog mehatroničkog interfejsa za primenu u medicini”. Primena od 2011. Korisnik: Elektronski fakultet u Nišu.

6.            Milutin Petronijević, Nebojša Mitrović, Vojkan Kostić, Dragan Tasić i Goran S. Đorđević, “Sistem za ispitivanje osetljivosti elektromotornih pogona na uticaj propada napona”. Kategorija tehničkog rešenja: (M83) “Novo laboratorijsko postrojenje, novo eksperimentalno postrojenje, novi tehnološki postupak”. Rezultat projekta ET-11029: “Razvoj tehnologija projektovanja i upravljanja mobilnim robotima za bezbedno kretanje u neuređenoj i promenljivoj sredini”. Primena od 2010. Korisnik: Elektronski fakultet u Nišu.

7.            Vojkan Kostić, Milutin Petronijević, Nebojša Mitrović, “Regulacija zakošenja i raspodele opterećenja u regulisanim višemotornim pogonima sa velikim rasponom”. Kategorija tehničkog rešenja: (M83) “Novo laboratorijsko postrojenje, novo eksperimentalno postrojenje, novi tehnološki postupak”. Rezultat projekta ET-11029: “Razvoj tehnologija projektovanja i upravljanja mobilnim robotima za bezbedno kretanje u neuređenoj i promenljivoj sredini”. Primena od 2010. Korisnik: Elektronski fakultet u Nišu, KOPEX MIN Fitip.

8.            Jeftenić Borislav, Jevtić Dragan, Rašić Neša, Bebić Milan, Štatkić Saša, Ristić Leposava, Gvozdenović Milorad, Kostić Vojkan, Mitrović Nebojša, „Regulisani elektromotorni pogon tračnog transportera”. Tehničko rešenje – industrijski prototip. Rezultat projekta EE-232031 „Povećanje energetske efikasnosti industrijskih procesa primenom elektromotornih pogona sa širokim opsegom regulacije brzine za transport fluida i materijala”. Primena od 20.08.2006. Korisnik : PD „TE-KO Kostolac”, d.o.o. Kostolac.

9.            Jeftenić Borislav, Jevtić Dragan, Rašić Neša, Bebić Milan, Štatkić Saša, Gvozdenović Milorad, Kostić Vojkan, „Regulisani elektromotorni pogon okreta gornje gradnje rudarskih mašina”. Tehničko rešenje – industrijski prototip. Rezultat projekta TR-006650 „Razvoj i primena novog koncepta pokretanja i upravljanja pogonima za kretanje rudarskim mašinama na površinskim kopovima po glavnim radnim osama”. Primena od 01.10.2005. Korisnik : PD Elektrane i kopovi Kostolac.

10.         Nebojša Mitrović, Milutin Petronijević, Vojkan Kostić, Borislav Jeftenić, „Tehničko rešenje za eliminaciju i korekciju zakošenja pretovarnog mosta”. Tehničko rešenje – industrijski prototip. Rezultat projekta TR-006142 „Automatizacija i modernizacija elektromotornih pogona dizaličnih postrojenja”. Primena od 5.10.2005. Korisnik: TE-TO Senta, LBFC Beočinska fabrika cementa.